AeroDR3 1717HD2

Carbon SMC (Carbon Sheet Molding Compound) is used for the enclosure material for the first time as a medical device*2. It is a material that is lightweight yet has excellent rigidity, and antibacterial agents can be kneaded into the material, achieving both high durability and safety required in the medical field.

*2As of Mar,2021, An internal investigation

High DQE and Lower Doses
Konica Minolta introduces the latest technological advances with the AeroDR 3 High sensitivity TFT panel. The thicker Csl scintillator and new ROIC can reduce the electrical noise level by 50% or more. Now we can provide patients and AeroDR users with high detector quantum efficiency (DOE) and lesser doses with AeroDR 3 when compared with previously cleared Konica Minolta systems.

Konica Minolta has developed a new detector design to provide easy handling and high durability.

The body uses a highly robust super monocoque structure, which meets the Military Standard of the U.S. Department of Defense (MIL- STD- 810G). Also, the water-resistance rating is IPX6. The load tolerance allows a surface load of 400 kg, point load of 180 kg, and two side support loads of 130 kg. These features make the product safe to use in a wide variety of settings.

*1@effective image area overall

*2φ40mm (1.6inches)

*3The test result does not provide any guarantee against damage or breakage.

Sustains IPX6 waterproof compliance even after the panel was dropped from height of 1.0m.

※The AeroDR 3 panel has cleared the durability test for water resistance after dropping it from a height of 1 m. The structure of the Aero DR 3 panel does not allow liquids to penetrate or damage the main components.

※The internal test condition is that the AeroDR 3 1417HD2 main body is dropped once onto a concrete floor that has a 2mm-thicksheet laid on it afterwhich the water resistance 、test is conducted. Depending upon the operating conditions and detector status, the IPX6 water resistance may be lost

In order to maximize the image quality of the AeroDR3, the CS-7 console is powered by the newly developed image-processing engine "REALISM". With improved frequency emphasis and optimized 100 µm imaging, its image processing technology allows printing the entire image while maintaining contrast, and produces clear stereoscopic images.

AeroDR3 HD2 offers a 100 µm pixel size, the world's smallest, and can use either 100 µm or 200 µm depending on the imaged body part. It also realizes high DQE while providing high resolution, and achieves DQE 56 ％ (1 mR, 1 cycle / mm), higher than our conventional model. As the flagship model, this device provides the high level of image quality.

* 100 µm pixels eliminate the effect of pixelation on the image, even under high power magnification in the viewer.

* 100 µm pixels make it possible to display micro structures within the image.